Gausium WS-03-S Workstation for Phantas
€2,380.00
Product information "Gausium WS-03-S Workstation for Phantas"
Gausium WS-03-S – Automatic Workstation for Phantas
The Gausium WS-03-S workstation has been specifically designed for use with the Phantas autonomous cleaning robot. By simply docking with the station, the robot can automatically perform essential supply and maintenance tasks, including battery charging, clean water refilling and sewage discharge.
The workstation also rinses important cleaning components such as the suction pipe and squeegee. This reduces manual maintenance, increases robot uptime and supports a largely autonomous cleaning process.
Automatic Power and Water Supply
Once Phantas docks with the WS-03-S, the workstation can automatically recharge the robot and refill its clean water tank. At the same time, wastewater is discharged through the connected drainage system.
- Automatic battery charging
- Automatic clean water refilling
- Automatic sewage discharge
- Reduced manual intervention for cleaning staff
Automatic Cleaning Component Rinsing
In addition to supplying power and water, the WS-03-S supports the regular cleaning of important components. Automatic rinsing helps reduce dirt deposits and lowers the risk of blockages within the suction system.
- Automatic suction pipe rinsing
- Automatic squeegee rinsing
- Supports consistent cleaning performance
- Helps extend the service life of components
Optional Mobile Water Tank
For locations without direct access to a water supply, the workstation can optionally be combined with a mobile water tank. This allows Phantas to be operated in areas where a permanent clean water connection is not available.
A suitable floor drain is still required for automatic wastewater discharge when using a permanently installed workstation.
Increased Uptime and Reduced Workload
By automating charging, water refilling, wastewater discharge and component rinsing, the WS-03-S allows Phantas to operate for longer periods with fewer interruptions. Recurring service tasks no longer need to be performed manually after every cleaning cycle.
The workstation is particularly suitable for locations with regular and extensive cleaning requirements, including shopping centres, hotels, office buildings, hospitals, public facilities and transport hubs.
Flexible Scheduling of Autonomous Cleaning Tasks
Because the workstation automatically manages the robot's power and water requirements, cleaning tasks can be scheduled more flexibly. Phantas can interrupt its cleaning process, return to the workstation and continue operation once the required service tasks have been completed.
Installation Requirements
The WS-03-S must be fixed to the floor or secured against a wall from the rear. A minimum free space of 2.0 metres is required in front of the workstation. At least 0.6 metres of free space must also be maintained to the right and left of the workstation's centre line.
A power supply, water source and suitable floor drain are required to use all automatic functions.
Technical Specifications
- Model: WS-03-S
- Compatibility: Gausium Phantas
- Dimensions: 558 × 510 × 702 mm
- Weight: 23 kg
- Electrical input: 100–240 VAC, approx. 8.1 A, 50–60 Hz
- Electrical output: 29.4 VDC, 25 A
- Operating temperature: 1 to 45 °C
- Operating humidity: 20 to 75% RH
- Storage temperature: −20 to 70 °C
- Storage humidity: 20 to 93% RH
- Communication method: LoRa
- Water pressure: 0.15 to 0.6 MPa
- External dependencies: Power supply, water source and floor drain
- Optional accessory: Mobile water tank
Low-Temperature Storage Notice
If the workstation is stored at temperatures below 0 °C, all water tanks and water pipes must be completely drained. This helps prevent frost damage to water-carrying components.
Scope of Delivery
- Gausium WS-03-S workstation
- Components according to the selected configuration
- Product documentation
The mobile water tank is optional and is not necessarily included in the standard scope of delivery.
Properties:
| Suitable for: | Gausium Phantas |
|---|
Manufacturer information "Gausium"
Manufacturer:
Shanghai Gaussian Automation Co., Ltd. (Gausium)
No. 666 Shengxia Rd., Pudong District, Shanghai, China
Responsible Person in the EU:
Gausium Europe B.V.
Valeton 4N, 5301 LW Zaltbommel, Netherlands
Login
Passend für
Gausium Phantas – Compact 4-in-1 Cleaning Robot for Commercial Spaces The Gausium Phantas is an autonomous cleaning robot designed for professional indoor environments where efficiency, hygiene and space optimization are essential. Combining four cleaning modes in one compact system, it automates routine cleaning tasks and delivers consistent results with minimal human intervention. Four Versions for Flexible Deployment Workstation version (with / without IEC) Charging station version (with / without IEC) IEC: enhanced sensor setup (6× LiDAR + camera) Non-IEC: standard sensors 4-in-1 Cleaning System Vacuuming, sweeping, scrubbing and dust mopping Suitable for mixed floor environments Flexible cleaning schedules Compact Design Minimum passage width: 600 mm Turning radius: 750 mm Works under furniture and tight spaces AI Navigation Real-time obstacle detection Dynamic path planning Reliable operation in busy environments Auto Spot Cleaning Detects dirt automatically Optimized resource usage Higher efficiency in high-traffic areas Optional Full Autonomy Automatic charging Water refill and drainage 24/7 operation possible Technical Data 540 × 440 × 617 mm 53 kg Scrubbing width: 330 mm Runtime: up to 4.5 h Charging time: ~2 h Applications Airports & transport hubs Industry & logistics Retail & shopping malls Healthcare
Gausium Phantas – Compact 4-in-1 Cleaning Robot for Commercial Spaces The Gausium Phantas is an autonomous cleaning robot designed for professional indoor environments where efficiency, hygiene and space optimization are essential. Combining four cleaning modes in one compact system, it automates routine cleaning tasks and delivers consistent results with minimal human intervention. Four Versions for Flexible Deployment Workstation version (with / without IEC) Charging station version (with / without IEC) IEC: enhanced sensor setup (6× LiDAR + camera) Non-IEC: standard sensors 4-in-1 Cleaning System Vacuuming, sweeping, scrubbing and dust mopping Suitable for mixed floor environments Flexible cleaning schedules Compact Design Minimum passage width: 600 mm Turning radius: 750 mm Works under furniture and tight spaces AI Navigation Real-time obstacle detection Dynamic path planning Reliable operation in busy environments Auto Spot Cleaning Detects dirt automatically Optimized resource usage Higher efficiency in high-traffic areas Optional Full Autonomy Automatic charging Water refill and drainage 24/7 operation possible Technical Data 540 × 440 × 617 mm 53 kg Scrubbing width: 330 mm Runtime: up to 4.5 h Charging time: ~2 h Applications Airports & transport hubs Industry & logistics Retail & shopping malls Healthcare
Gausium Phantas – Compact 4-in-1 Cleaning Robot for Commercial Spaces The Gausium Phantas is an autonomous cleaning robot designed for professional indoor environments where efficiency, hygiene and space optimization are essential. Combining four cleaning modes in one compact system, it automates routine cleaning tasks and delivers consistent results with minimal human intervention. Four Versions for Flexible Deployment Workstation version (with / without IEC) Charging station version (with / without IEC) IEC: enhanced sensor setup (6× LiDAR + camera) Non-IEC: standard sensors 4-in-1 Cleaning System Vacuuming, sweeping, scrubbing and dust mopping Suitable for mixed floor environments Flexible cleaning schedules Compact Design Minimum passage width: 600 mm Turning radius: 750 mm Works under furniture and tight spaces AI Navigation Real-time obstacle detection Dynamic path planning Reliable operation in busy environments Auto Spot Cleaning Detects dirt automatically Optimized resource usage Higher efficiency in high-traffic areas Optional Full Autonomy Automatic charging Water refill and drainage 24/7 operation possible Technical Data 540 × 440 × 617 mm 53 kg Scrubbing width: 330 mm Runtime: up to 4.5 h Charging time: ~2 h Applications Airports & transport hubs Industry & logistics Retail & shopping malls Healthcare
Gausium Phantas – Compact 4-in-1 Cleaning Robot for Commercial Spaces The Gausium Phantas is an autonomous cleaning robot designed for professional indoor environments where efficiency, hygiene and space optimization are essential. Combining four cleaning modes in one compact system, it automates routine cleaning tasks and delivers consistent results with minimal human intervention. Four Versions for Flexible Deployment Workstation version (with / without IEC) Charging station version (with / without IEC) IEC: enhanced sensor setup (6× LiDAR + camera) Non-IEC: standard sensors 4-in-1 Cleaning System Vacuuming, sweeping, scrubbing and dust mopping Suitable for mixed floor environments Flexible cleaning schedules Compact Design Minimum passage width: 600 mm Turning radius: 750 mm Works under furniture and tight spaces AI Navigation Real-time obstacle detection Dynamic path planning Reliable operation in busy environments Auto Spot Cleaning Detects dirt automatically Optimized resource usage Higher efficiency in high-traffic areas Optional Full Autonomy Automatic charging Water refill and drainage 24/7 operation possible Technical Data 540 × 440 × 617 mm 53 kg Scrubbing width: 330 mm Runtime: up to 4.5 h Charging time: ~2 h Applications Airports & transport hubs Industry & logistics Retail & shopping malls Healthcare