KEENON KLEENBOT C40 / C40S Replacement Battery – Massive power for professional floor cleaning The KEENON KLEENBOT C40 / C40S replacement battery is the powerhouse behind your automated cleaning solution. With an impressive capacity of 100 Ah, this energy storage unit provides the necessary endurance for intensive wet and dry cleaning of large areas. Its robust construction is perfectly matched to the mechanical requirements of the C40 series, ensuring a stable power supply for the suction and brush motors. This original component is the key to maximizing cleaning performance per shift and ensures that your KLEENBOT remains ready for action at all times. Seamless Integration & System Monitoring Full compatibility with the charging electronics of C40 and C40S models. Precise feedback on charge status for efficient fleet management. Easy replacement process for minimal maintenance time on-site. Business Efficiency & Area Performance Supports a cleaning capacity of up to 1,200 m²/h throughout the entire runtime. Stable energy supply for the integrated fresh and waste water systems. Enables continuous use in facilities with high cleaning requirements. Operation & Charging Processes Designed for a runtime of 4 to 6 hours, depending on the selected cleaning mode. Full recharge in approx. 6 hours for the next operational cycle. High cycle stability ensures long-term ROI for your investment. Technical Details Voltage: DC 24 V Capacity: 100 Ah Battery Life: 4 – 6 hours (mode dependent) Charging Time: approx. 6 hours Compatibility: KEENON KLEENBOT C40, C40S Benefits & Use Cases Shopping Malls: Reliable floor cleaning during and after opening hours. Healthcare: Ensuring highest hygiene standards through constant power. Office Buildings: Efficient cleaning of large corridors and common areas. B2B Leasing: Maintaining fleet value by using original batteries. Highlights Original KEENON quality Enormous 100 Ah capacity Up to 6h runtime Optimized for C40/C40S

KEENON Multi-Model Replacement Battery – High-performance energy for T10 & C30 The KEENON replacement battery for the DINERBOT T10 and KLEENBOT C30 models is the power center for your professional robotics solution. With a capacity of 28.5 Ah, this energy storage unit was specifically developed to meet the high demands of service and cleaning tasks in the commercial sector. The discreet, robust housing integrates seamlessly into the robot's architecture and protects the high-efficiency LFP cells from external influences. This original component ensures that both delivery precision and cleaning thoroughness are maintained over long periods. With this battery, you rely on maximum operational readiness and constant energy output for your professional shift operations. Intelligent System Integration & Monitoring Full compatibility with the energy management systems of the T10 and C30 series. Precise transmission of battery data for reliable autonomous return to the charging station. Optimized communication with the onboard electronics to maximize service life. Business Performance & Endurance Secure power supply for the powerful 19,000 Pa vacuum unit of the C30. Constant performance for up to 12 hours of service with the DINERBOT T10. Supports complex AI calculations and LiDAR navigation under full load. Operation & Charging Processes Fast-charging capable: full capacity recovery in approx. 4.5 to 6 hours. Safe use in air-conditioned indoor areas at temperatures from 0 to 40 °C. High cycle stability through advanced LFP (Lithium Iron Phosphate) cell technology. Technical Details Voltage: DC 25.6 V Capacity: 28.5 Ah Runtime (T10): 10 – 12 hours Runtime (C30): 3 – 10 hours (mode dependent) Charging Time: approx. 4.5 – 6 hours Compatibility: KEENON T10, KEENON C30 Benefits & Use Cases Gastronomy (T10): Covering intensive lunch and dinner shifts without intermediate charging. Facility Management (C30): Cleaning areas up to 2,500 m² with one charge. Retail: Reliable customer interaction and promotion throughout the day. B2B Leasing: Maintaining fleet value through certified original spare parts. Highlights Original KEENON brand quality High 28.5 Ah capacity Safe LFP technology Long service life

KEENON Multi-Model Replacement Battery – The power solution for T3, T8 & T11 This original KEENON replacement battery is the central power source for the high-performance service robots of the DINERBOT series, including the T3, T8, and T11 models. Developed for demanding continuous use in hospitality and catering, this high-capacity battery provides a stable power supply for long shifts. Precise synchronization with the T-series control systems guarantees optimal energy efficiency and protects internal hardware components. With this battery, you ensure the maximum productivity and endurance of your autonomous service fleet. Seamless System Integration & Control Full compatibility with the charging management systems of T3, T8, and T11. Precise transmission of remaining runtime to the robot's navigation system. Easy replacement for a quick battery swap during ongoing operations. Performance & Business Endurance Supports intensive use of LiDAR and stereo vision sensors. Stable power output for up to 16 hours of runtime (model dependent). Constant performance even with maximum loading of the tray levels. Operation & Safety Standards Optimized cell technology for a high number of charge and discharge cycles. Safe operation in professional indoor environments from 0 to 40 °C. Low self-discharge and integrated protection against overload. Technical Details Voltage: DC 24 V – 25.9 V (system dependent) Capacity: 20 Ah – 20.8 Ah Battery Life: up to 16 hours (e.g., T8) Compatibility: KEENON DINERBOT T3, T8, T11 Environment: Dry indoor areas Benefits & Use Cases Gastronomy: Handling long opening hours without charging interruptions. Hotel Restaurants: Reliable service from breakfast to dinner. Events & KTV: Maximum availability during high visitor frequency. B2B Fleet Management: Reduced complexity through unified spare parts supply. Highlights Original KEENON quality Up to 16h runtime Multi-model compatibility High cycle stability

KEENON Multi-Model Replacement Battery – Maximum power for W3, T9 & S100 series This high-quality KEENON replacement battery is the universal power solution for a wide range of professional service robots, including the BUTLERBOT W3, DINERBOT T9, T9 Pro, and S100 series. Developed for maximum reliability in continuous use, this energy storage unit guarantees the constant performance of your robot fleet. Precise manufacturing ensures that the battery can be seamlessly integrated into all compatible models, maintaining the mobility and readiness of your systems without any loss of performance. Universal System Compatibility & Integration Full support for KEENON W3, T9, T9 Pro, and S100 systems. Seamless communication with the onboard charging electronics of all compatible models. Simple replacement process to optimize fleet availability. Business Performance & Endurance Constant power supply for autonomous floor changes and heavy delivery loads. Supports high-efficiency sensing and AI processing of the T9 and S100 series. Secure power supply for contactless goods transport around the clock. Operation & Charging Processes Supports fast charging for capacity recovery in approx. 6.5 hours. Optimized for intensive use in air-conditioned indoor areas (0 to 40 °C). High cycle stability for long-term profitability of your investment. Technical Details Voltage: DC 25.6 V Capacity: 20.8 Ah Battery Life: up to 12 hours (model dependent) Charging Time: approx. 6.5 hours Compatibility: KEENON W3, T9, T9 Pro, S100 Benefits & Use Cases Hotels (W3/T9): Ensuring 24/7 room service availability. Gastronomy (T9/T9 Pro): Reliable support during high guest volumes. Industry & Logistics (S100): Stable material transport in shift operations. B2B Fleet Management: Reduced inventory through unified replacement batteries. Highlights Original KEENON quality Multi-model compatibility 12 hours runtime Durable cell technology